The removal of trees
Sometimes a tree reaches the point where it is necessary to say goodbye to her. It can be a painful choice to make, but sometimes the tree becomes too close to the house, becomes too ill, receives an incurable some pest infestation, or grows too tall and gets near a power line. If any of these things happen, within its power to do the right thing and get rid of the tree. Although you could have spent hours and hours of receiving the tree where it is today, is almost disgraceful to the tree so that it can suffer in poor condition.
Once you’ve made the choice to remove the tree, you need your disengagement plan. I can not begin to count the number of windows I’ve seen removed or crushed cars I’ve seen because of poor planning in the process of clearing trees. Decide what direction you want fall, and measure precisely to ensure that it will fall completely clear of anything else that could cause damage to.
Once you drop the planned direction, you must climb the tree and tie two long wires at the top. Anchor on the opposite side of where you want it to fall. This allows you to adjust the direction the tree is being reduced, if you start leaning towards nothing can destroy.
Now it has taken all necessary precautions, you’re ready to start cutting. If you plan to use a chainsaw or axe manual, please step back and examine how they are crazy. The felling of a tree by hand will take you forever, and not even begin to be as accurate using a chainsaw. If you do not have a chainsaw, you should not even consider doing without him. Ask around with neighbors to see if someone has one you can borrow. If that does not work, buy or rent a room in her shop home improvement.
Before you start cutting away at the tree, you must wear proper eye and face protection in case the wood chips fly to their eyes. I had a friend who blinded his right eye, while cutting down a tree, so I hope all my readers do not make the same mistake as he did. Every time you operate a power tool, always sure to use adequate protection for all exposed parts of his body.
By making the cut, you do not want to just cut a straight line on the tree. It’s better to cut out “V” in the tree. This is because if the straight line cut, the trees will end up rolling to one side or the other. If you cut into a “V”, the tree can fall into the exact direction you want to fall. Sometimes it might be a few feet due to human error during cutting, but if you have some strong friends pull the strings tied to you, you might line a backup with the way I wanted to take. The whole process should not take more than an hour.
Eliminating the strain may be a little harder. You have several options, one can rent a stump chipper to destroy completely visible section of the stump. Or you can spend countless hours digging out. In digging out the stump is much deeper, but forever. If you have children this should not be a problem. Children are often thought of digging fun, and we are very excited to go out and dig all day with his friends. This was the method used, and I had all the stump within a week. Note that my stump was about 1 foot in diameter, and the excavation probably will not work for stumps much bigger than that.
